Giraffa the Mist nebulization at high altitude

Giraffa, nebulization at high altitude

 mist-cannon-fan

This fog maker is mainly used to suppress dust. Giraffa uses an industrial atomizing system that shoots billions of small droplets into the air up to 25 metres with a rotation field of 340° through a ring of atomizing nozzles fitted on a powerful fan outlet. Depending on the version, it can reach a maximum 5m height.

Technical specifications

  • Pressure:up to 10bar
  • No. of nozzles (2 rings with 32 nozzles):64
  • Maximum coverage:approx. 1.850m2
  • Air flow rate:9.300m3/h
  • Potenza installation:ventilator 3Kw RISC Alda mento corona 0,8Kw
  • Power supply:400 V-50Hz
  • Protection rating:IP65
  • Rotation range:340°
  • Elevation:-20° +45°
  • Fan diameter:410mm
  • 2800Rpm
  • Flow range:approx. 25m
  • Noise:< 93Lwa
  • ON/OFFswitch
  • Rotation right/left
  • Pulse counter rotation angle programming
  • Fan start
  • Start water supply (motor-pump/solenoid valves)
  • Work/pause cycle timer
  • Operation light with buzzer
  • Nozzle spring heating
  • Operation light with buzzer
Category:

Description

 

Technical data

Code Model Description Dimensions (LxDxH) mm Weight
ZX.8503 GIRAFFA LP Industrial fogging system for dust suppression with fog module, 800 x 1000 x 2450 210kg
  FIXED 115 115cm support column, water ­filter and control panel mounted
    on a metal base
ZX.8504 GIRAFFA LP Industrial fogging system for dust suppression with fog module, 800 x 1000 x 5100 280kg
  FIXED 300 300cm support column, water ­filter and control panel mounted
    on a metal base
ZX.8506 GIRAFFA LP Industrial fogging system for dust suppression with fog module, 115 1920 x 2100 x 2730 400kg
  MOBILE VERSION cm support column, water ­filter and control panel mounted
115 on a wheeled base
ZX.8507 GIRAFFA FIXED Industrial fogging system for dust suppression with fog module, 1200 x 2100 x 1900 600kg
LP HYDR. short support column, water ­filter and control panel mounted
on a metal base
Fog nozzle created by Idrobase Group, to generate billions of micro droplets with a diameter of 1,4 to 10micron
Fog nozzle created by Idrobase
Group, to generate billions
of micro droplets with a
diameter of 1,4 to 10micron
High pressure pumping module at 70bar with flow rate from 11 to 21l/min designed especially for maximum output
High-pressure pumping module at 70bar with flow rate from 11 to 21l/min designed especially for maximum output
Practical remote control to regulate work/pause times as well as rotation and elevation. Range 30m
Practical remote control to
regulate work/pause times
as well as rotation and
elevation. Range 30m

 

 

 

Flow rate (with nozzle sizes 5, 10 and 15)

Pressure Flow rate min-max
3bar 8,5gl/h 52,6gl/h
4bar 9,6gl/h 60,5gl/h
5bar 10,6gl/h 68,2gl/h

 

 

Detail of the cannon outlet highlighting two rings of atomising nozzles
Detail of the cannon outlet highlighting two rings of atomizing nozzles

Recommended accessories

Controler and dosing pump
Controler and dosing pump
  Pressure pump:
  The pump is needed to reach the ideal
IT.9038 working pressure of 10bar.
  Multistage, vertical electric pump
  4kW-400 V- 50Hz – 120 l/m
  Remote control 12 keys
  with relay transmitter and receiver with
IT.9028 the following functions:
  • ON/OFF general
  • Oil pump control for hydraulic arm
  version
  • Rotation angle ctrl (rh/lh)
  • Rotation control (ON/OFF)
  • Rotation angle memory control
  • Emergency stop control
• Nozzles ring activation control

 

Construction and mining sites, open-air

dumps, waste disposal, large industrial

sites are ideal applications for the

“Giants” of nebulization

Reviews

There are no reviews yet.

Be the first to review “Giraffa the Mist nebulization at high altitude”