Fog Maker ATEX

Example of dust suppression application in ATEX 21 zone

example

atex

Technical specifications

  • Operating pressure: 50bar
  • No. of nozzles: 3 ring with 52 nozzles
  • Maximum coverage: approx. 10.700m2
  • Air flow rate: 28.500 m3/h
  • Power absorption: fan 11kWring heating 2kW
  • Power supply: 480 V-60Hz
  • Protection rating: IP65
  • Rotation angle: 340
  • Elevation: -20° +45°
  • Fan diameter: 660mm
  • 2800Rpm
  • Flow range: approx. 60m
  • Noise: < 93Lwa
  • The electric control panel will be designed and produced according to the required application
  • On request, it can be equipped with a pump unit with flow rate from 21 to 42l/min
Category:

Description

The system designed and developed especially for use in areas subject to the risk of explosion

Fog Maker ATEX is the new high pressure cannon (50bar) designed for dust suppression, and in particular of carbon and sulphur dust. The jet from Fog Maker ATEX can reach 60 metres without wind, and can rotate from 0 to 340°.

Detail of the Fog Maker ATEX cannon outlet highlighting the ring of 156 atomizer nozzles
Detail of the Fog Maker ATEX cannon outlet highlighting the
ring of 156 atomizer nozzles
Noise barrier to reduce the noise of the Fog Maker during operation
Noise barrier to reduce the noise of the Fog Maker during operation
Detail of fan installed on  Fog Maker ATEX cannon
Detail of fan installed on
Fog Maker ATEX cannon
Steel platform: practical handing
Steel platform: practical handing

Technical data                                                                        High pressure

Code Model Description Dimensions Weight
  (LxDxH) mm  
IT.9063 ATEX HP 15bar Industrial misting system for dust suppression, short support 1430 x 870 x 160 340kg
  column, water ­ filter and control panel mounted on a metal base.  
  Designed for installation in ATEX zones, i.e. areas subject  
    to the risk of explosion  

Reviews

There are no reviews yet.

Be the first to review “Fog Maker ATEX”